Thermalec Titanium Electrical Heater

Atecpool
Thermalec Titanium Electrical Heater

The Thermalec pool and spa heater range

Built using titanium elements, to the same exact standards traditionally associated with Thermalec® heaters, the THR TITANIUM range fulfils all the required electrical safety standards.

Size range from 3kW to 168kW

Unique spiral flow allows efficient heat removal from the elements, minimising the scale and sediment build up.
Unique design ensures cooler water from the filter pump does not strike the elements directly (giving longer life).
Air generated from the pump passes harmlessly around the sides of the baffles and across the top of the heater elements (The heat pumps heat both air and water).
The control thermostat is positioned to sense the temperature of incoming water and controls the pool to within 1°C.
The safety thermostat senses the water temperature leaving the heater.
Thermalec® heaters can be used in conjunction with other heating systems to provide year round heating solutions for your pool or spa.
Each heater is designed with its own simple self diagnostic system.
Heating elements are always submerged.

Category:
Tag:
Brand:

Standards

Thermalec® pool and Spa heaters are CE marked and comply with:
EU Council Directive 89/336/EEC & 93/068/EEC on Electromagnetic compatibility
EU Council Machinery Directive 98/37/EEC
EU Council Low Voltage Directive 2006/95/EEC & 72/23EEC
Harmonised Standards: EN55014, EN55104, EN5501, EN5502, CEI801-2, CEI801-3 and EN60335-2-35

Control and indication

Water temperature cut-out: Factory set to trip at water outlet temperature of 52°C. Manual reset on front panel
Thermostats: Pressurised liquid filled capillary type
Pool temperature control: Analogue dial, calibrated 15°C to 45°C and graduated at 1°C intervals.
Mains indicator lamps: Red (mains power is on), Amber (filter pump interlock power present).
Status indicator lamps: Red (heater’s ON/OFF switch ON), White (safety thermostat trip armed), Amber (pump interlock relay OK), Green (heating elements powered)

Materials of Construction

Heater vessel: Fusion epoxy coated cast iron
Element holding plate: uPVC
Gasket: Silicone rubber
Water connections: uPVC socket
Heater elements: Titanium sheath
Electrical enclosure: Powder coated steel

Operating data

Water inlet/outlet: Socket for 50mm or 2” NB pipe
Water temperature: 52°C heater outlet
Operating pressure: 0 bar max.
Ambient temperature: 40°C max.
Pool temperature control range: 15°C to 45°C
Thermostat operating difference: 5 C°

Attachments

Drag
Download Catalogue
12kW uk Manual
24kW uk Manual
36kW uk Manual
72kW uk Manual 120kW uk Manual
Download Warranty Letter

Reviews

There are no reviews yet.

Be the first to review “Thermalec Titanium Electrical Heater”

Your email address will not be published. Required fields are marked *

productsSimilar products